HP Z Workstation series User Manual page 57

Hide thumbs Also See for Z Workstation series:

Table of Contents

Push gently outward on the DIMM socket levers as shown in the following illustration. (The

example shows a HP Z600 Workstation.)

Figure 7-1

Align the DIMM connector key with the DIMM socket key, and then seat the DIMM firmly in the

socket (1) as shown in the following illustration.

CAUTION:

DIMM damage, align these guides properly when installing DIMMs.

Figure 7-2

Secure the socket levers (2).

Replace all components that were removed in preparation for component installation.

ENWW

Opening DIMM socket levers

DIMMs and their sockets are keyed for proper installation. To prevent socket or

Seating the DIMM

Installing a DIMM

Table of Contents