Real Time Transmission; Overseas Mode; Delayed Faxing (Monochrome Only) - Brother MFC-J6510DW User Manual

Real Time Transmission

When you are sending a fax, the machine will
scan the documents into the memory before
sending. Then, as soon as the telephone line
is free, the machine will start dialling and
sending.
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can do
this by turning on Real Time TX.
a
Press (FAX).
b
Load your document.
c
Press d or c to display Real Time TX.
d
Press Real Time TX.
e
Press On.
Note
• If the memory is full and you are sending a
black & white fax from the ADF, the
machine will send the document in real
time (even if Real Time TX is set to
Off). Faxes from the scanner glass
cannot be sent until you clear some of the
memory.
• In Real Time Transmission, the automatic
redial feature does not work when using
the scanner glass.

Overseas Mode

3
If you are having difficulty sending a fax
overseas due to possible interference on the
telephone line, we recommend that you turn
on the Overseas mode. After you send a fax
using this feature, the feature will turn itself
off.
a
Press
b
Load your document.
c
Press d or c to display
Overseas Mode.
d
Press Overseas Mode.
e
Press On (or Off).
Delayed Faxing
(Monochrome only)
You can store up to 50 faxes in the memory
to be sent within 24 hours. These faxes will
be sent at the time of day you enter in step f.
a
Press
b
Load your document.
c
Press d or c to display Delayed Fax.
d
Press Delayed Fax.
e
Press On.
f
Enter the time you want the fax to be
sent (in 24-hour format) using the
buttons on the LCD.
(For example, enter 19:45 for 7:45 PM.)
Press OK.
Note
The number of pages you can scan into
the memory depends on the amount of
data that is printed on each page.
Sending a fax
(FAX).
(FAX).
3
3
3
13