Loading Paper In Paper Tray #2 - Brother MFC-J6510DW User Manual

i
While holding the paper tray in place,
pull out the paper support (1) until it
clicks and unfold the paper support
flap (2).
Note
Before you shorten Tray #1, take the paper
out of the tray. Then shorten the tray by
pressing the universal guide release
button (1). Adjust the paper length
guide (2) to fit the paper size you are going
to use. Then put the paper into the tray.
Loading paper in paper
tray #2
Note
You can only use plain paper sizes A4,
A3, Ledger, Letter or Legal in Tray #2.
a
2
Pull the paper tray completely out of the
machine.
1
Note
• If you are using A3, Ledger or Legal size
paper, press the universal guide release
button (1) as you slide out the front of the
paper tray until it clicks.
1 • You can check if the length of the tray is
adjusted correctly by opening the paper
tray cover.
2
Loading paper
2
2
1
13