Duplex (2-Sided) Copying - Brother MFC-J6510DW User Manual

Chapter 7

Duplex (2-sided) copying

You can reduce the amount of paper used for
copies by copying on both sides of the paper.
We recommend you load your document in
the ADF for duplex copying.
Note
• You can copy 2-sided documents up to
Legal size from the ADF.
• You can only use plain paper sizes A4,
A5, A3, Letter, Legal or Ledger.
a
Press Duplex on the machine's panel.
b
Load your document.
If you want to copy a 2-sided document,
load your document in the ADF.
c
Press Copy.
d
Do one of the following:
 If you are copying A3 or Ledger size
document, go to step e.
 If you are copying A4, A5, Letter or
Legal size document, go to step h.
e
Press More.
f
Press
A3/LGR Duplex Copy Setting.
Note
N in 1 copy is not available with
A3/LGR Duplex Copy Setting.
g
Press Fit to Page or Keep Scale.
Note
If you choose Fit to Page, your
machine will reduce the document size
automatically to fit the printable area.
If you choose Keep Scale, your
machine will not change the document
size. The top and bottom might be cut off
depending on the document size.
44
h
Press d or c to display the duplex copy
7
type you want, and press it. (See Duplex
copying type on page 45.)
i
Enter the number of copies you want.
j
Press Mono Start or Colour Start.
If you placed the document in the ADF,
the machine scans the pages and starts
printing.
If you are using the scanner glass, go to
step k.
k
Press Scan and place the next page on
the scanner glass. Press Mono Start or
Colour Start. (Repeat this step for each
additional page.)
l
After all the pages have been scanned,
press Complete.
The machine starts printing.
DO NOT touch printed pages until they are
ejected the second time. The machine will
print and eject the first side, and then pull the
paper back in to print the second side.
Note
• If your document causes paper jams, try
using one of the special duplex copy
settings. Press More after step c. Press
Advanced, and then press one of the jam
prevention settings: DX1 or DX2.
DX1 helps avoid paper jams when copying
by allowing more time for the ink to dry.
DX2 allows more time for the ink to dry
while also using less ink.
• DX1 is not available for A3 or Ledger size
paper.
• 2 in 1 (ID), Poster and Book Copy
are not available with Duplex Copy.
• 1 to 2 and Skew Adjustment are not
available with 2sidei2side and
2sidei1side.
• When using A3 or Ledger size paper,
Enlarge/Reduce is not available with
1sidei2side and 2sidei2side.
• Fit to Page is not available with
1sidei2side and 2sidei2side.