Honda CR250R Owner's Manual & Competition Handbook page 99

Front Suspension Adjustments
24. Install the handlebar (22) mounting rubbers
(23), washers and handlebar holder nuts (24)
and tighten the handlebar holder nuts to the
specified torque:
32 lbf·ft (44 N·m, 4.5 kgf·m)
(23)
(24)
(22) handlebar
(23) mounting rubbers
(24) washers/handlebar holder nuts
25. Install the number plate (25) by aligning its
hole (26) with the tab (27) on the steering
stem.
(26)
(27)
(25) number plate (27) tab
(26) hole
94
Adjustments for Competition
26. Install and tighten the number plate bolt (28).
Install the handlebar pad (29).
(29)
(28)
(22)
(28) number plate bolt
(29) handlebar pad
27. With the front brake applied. pump the fork
up and down several times to seat the axle
and check front brake operation.
(25)
28. First, tighten the left axle pinch bolts (30)
alternately.
While keeping the forks parallel, alternately
tighten the right axle pinch bolts to the
specified torque:
15 lbf·ft (20 N·m, 2.0 kgf·m)
(30)
(30) axle pinch bolts
NOTICE
To avoid damage when torquing the axle pinch
bolts, be sure the axle is seated firmly onto the
left fork leg clamp inner surface.
29. Clean the threads of the disc cover bolts and
axle holder thoroughly.
30. Apply locking agent to the disc cover bolt
threads.
31. Install the disc cover (31) and tighten the
disc cover bolts (32) to the specified torque:
10 lbf·ft (13 N·m, 1.3 kgf·m)
(31)
(32)
(31) disc cover (32) disc cover bolts
32. Turn the compression and rebound damping
adjusters back to their original settings.
(30)