Honda CR250R Owner's Manual & Competition Handbook page 50

Cable End Adjustment
Minor adjustments are generally made with the
clutch cable end adjuster.
Cable end adjuster:
(–)
(2)
(+)
(2) cable end adjuster
(+) increase freeplay
(–) decrease freeplay
Turning the cable end adjuster (2) in direction (+)
will increase freeplay and turning it in direction
(–) will decrease freeplay.
If the adjuster is threaded out near its limit or the
correct freeplay cannot be reached, turn the
adjuster all the way in and back out one turn and
make the adjustment with the integral cable
adjuster.
Integral Cable Adjustment
The integral cable adjuster is used if the cable
end adjuster is threaded out near its limit — or
the correct freeplay cannot be obtained.
Integral cable adjuster:
(+)
(–)
(4)
(3) lock nut (+) increase freeplay
(4) integral cable adjuster (–) decrease freeplay
1. Turn the cable end adjuster in direction (+)
until it seats lightly and then turn it out 5
turns.
2. Loosen the lock nut (3).
3. Turn the integral cable adjuster (4) to obtain
the specified freeplay 3/8 – 3/4 in (10 – 20
mm).
4. Tighten the lock nut. Check the adjustment.
5. Start the engine, pull the clutch lever in, and
shift into gear. Make sure the engine does not
stall and the motorcycle does not creep.
Gradually release the clutch lever and open
the throttle. Your CR should move smoothly
and accelerate gradually.
If you can't get proper adjustment, or the clutch
does not work properly, the cable may be kinked
or worn, or the clutch discs may be worn. See
your Honda dealer or refer to the official Honda
Service Manual (page 134).
Other Inspections & Lubrication
• Check that the clutch lever assembly is
positioned properly and the securing bolts are
tight.
• Check the clutch cable for kinks or signs of
wear. If necessary, have it replaced.
• Lubricate the clutch cable with a commercially-
(3)
available cable lubricant to prevent premature
wear and corrosion.
Clutch Operation
1. Check for smooth clutch lever operation. If
necessary, lubricate the clutch lever pivot or
clutch cable.
2. Check the clutch cable for deterioration,
kinks, or damage.
Clutch System
45
Servicing Your Honda