Honda CR250R Owner's Manual & Competition Handbook page 55

Cylinder System
Cylinder Removal
1. Remove the expansion chamber (page 75).
2. Remove the exhaust gasket (1).
(1)
(1) exhaust gasket
3. Remove the bolts (2), clamp (3), RC cover (4)
and gasket (5).
(2)
(3)
(5)
(2) bolts (4) RC cover
(3) clamp (5) gasket
50
Servicing Your Honda
4. Loosen the lock nuts (6) and disconnect the
RC valve control cables (7) from the RC
valve pulley (8).
(7)
(6) lock nuts
(7) control cables
5. Loosen the radiator hose clamp screw (9) and
disconnect the radiator hose (10).
6. Remove the radiator grills (11) on both sides.
7. Loosen the upper mounting bolts (12) on
both sides.
8. Remove the lower mounting bolts (13), then
swing the radiators (14) forward on both
sides.
(4)
(9)
(9) screw
(10) radiator hose
(11) radiator grill
(6)
(8)
(8) RC valve pulley
(12)
(14)
(10) (11)
(13)
(12) upper mounting bolt
(13) lower mounting bolt
(14) radiator
9. Remove the cylinder (15) by removing the
four flange nuts (16).
(15)
(16)
(15) cylinder (16) flange nuts
10. Remove the gasket (17) and dowel pins (18).
(17) gasket (18) dowel pins
(17)
(18)