FS-8704-07_AB-CSP Manual
3.
Hardware Connections
Make sure the device IP_address is configured to be on the same IP network as the
FieldServer. Use a crossover cable if the FieldServer is connected directly to the PLC device.
Use a straight cable if the FieldServer is connected to a hub.
Configure the PLC according to manufacturer's instructions
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com
SITE
ETHERNET
FS-8915-10
PLC
Ethernet Interface
FS-8915-10
(408)-262-2299
FIELDSERVER
AB-CSP
CONNECTION DIAGRAM
BASE NAME:
DATE: 5/04/04
FILE NAME:
BY:
MC
Page 5 of 15