Table of Contents
Advertisement
FS-8704-07_AB-CSP Manual
4.
Configuring the FieldServer as a AB-CSP Client
For a detailed discussion on FieldServer configuration, please refer to the FieldServer
Configuration Manual. The information that follows describes how to expand upon the factory
defaults provided in the configuration files included with the FieldServer (See ".csv" sample files
provided with the FieldServer).
This section documents and describes the parameters necessary for configuring the FieldServer
to communicate with an AB-CSP Server.
4.1.
Data Arrays/Descriptors
The configuration file tells the FieldServer about its interfaces, and the routing of data
required. In order to enable the FieldServer for AB-CSP communications, the driver
independent FieldServer buffers need to be declared in the "Data Arrays" section, the
destination device addresses need to be declared in the "Client Side Nodes" section, and
the data required from the servers needs to be mapped in the "Client Side Map Descriptors"
section. Details on how to do this can be found below.
Note that in the tables, * indicates an optional parameter, with the bold legal value being the
default.
Section Title
Data_Arrays
Column Title
Data_Array_Name
Data_Array_Format
Data_Array_Length
Example
//
Data Arrays
Data_Arrays
Data_Array_Name,
DA_AI_01,
DA_AO_01,
DA_DI_01,
DA_DO_01,
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com
Function
Provide name for Data Array
Provide data format. Each Data
Array can only take on one format.
Number of Data Objects. Must be
larger than the data storage area
required by the Map Descriptors for
the data being placed in this array.
Data_Format,
Float,
Float,
Bit,
Bit,
Page 6 of 15
Legal Values
Up to 15 alphanumeric
characters
INT16, INT32, BIT,
FLOAT
1-10,000
Data_Array_Length
200
200
200
200
Advertisement
Table of Contents
