Table of Contents
Advertisement
FS-8705-06 GPA (General Purpose ASCII) Manual
3.
Hardware Connections
The FieldServer is connected to the vendor device as shown in connection drawing.
Configure the ASCII Passive Client according to manufacturer's instructions
ASCII Data
Source
Eg. Scale
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com
Ethernet Network
Connection via std networking
interfaces such as hubs, switches,
routers.
Use 8917-02 or a 3 wire cable
where you connect the remote
device Xmit to RJ45-01, the remote
Receive to RJ45-08 and, the gound
wire to RJ45-04.
Page 5 of 15
Advertisement
Table of Contents
