Table of Contents
Advertisement
Page 24 of 29FS-8700-66_GE-SNP Manual
No Message
38 GE_STAT_DRV_ACT_NO_DATA_R
39 GE_STAT_DRV_ACT_NO_NODE_R
40 GE_STAT_DRV_ACT_NAK_R
41 GE_STAT_DRV_ACT_NORMAL_R
42 GE_STAT_CD_UPD_CHECK
43 GE_STAT_CD_UPD_FUNCTION
44 GE_STAT_CD_UPD_NO_START
45 GE_STAT_CD_UPD_PROTO
46 GE_STAT_CLIENT_SENDS_FRAG
47 GE_STAT_CD_UPD_IC_TIMEOUT
48 GE_STAT_CD_UPD_MSG_IGNORED
49 GE_STAT_CD_UPD_NAK
50 GE_STAT_CD_UPD_STREAMING
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: support@fieldServer.com
Description
Corresponds to slave driver actions in
responding to a poll.
available.
Corresponds to slave driver actions in
responding to a poll.
happen as a connection would have been
refused.
The slave cannot respond to a poll for one
of the reasons above.
The Server has responded to a poll
normally
A
message
is
invalid
checksum failed.
A message is invalid because the message
type is not known.
A message is invalid because it begins with
the wrong codes.
A message is invalid because it is
unexpected in its current context or some
other reason.
Counts the number of read/write message
fragments sent by the Client.
Counts the number of times that an IC
timeout error occurred at the DLL layer
Counts the number of times a message
was ignored. A message will be printed to
the error log with the reason.
Counts the number of times that the slave
received a short nak from the Client
Counts the number of times the DLL layer's
buffer was too full to process additional
incoming data.
Page 24 of 29
There is no data
This should never
because
the
Advertisement
Table of Contents
