Manual Operation; Resetting The System - Ford Transit Owner's Manual

Switching the System On or Off
You can switch the system on or off using
the vehicle settings menu in the
information display. See General
Information (page 62).
• When switched on the running boards
extend and stow automatically.
• When switched off the running boards
remain in the stowed position.
Deploy and Stow Using the
Information Display
You can deploy and stow the running
boards using the information display. See
General Information (page 62).
Note: If you drive off with the power running
boards deployed the engine will stop.

Manual Operation

Note: In the event of a malfunction you can
stow the running boards manually.
Transit (TTG) Vehicles Built From: 06-01-2014, Vehicles Built Up To: 31-12-2014, CG3612en enGBR, Edition date: 12/2013
Power Running Boards
40
1. Insert the wheel brace into the guide
hole and turn the handle clockwise
until the step is in the fully stowed
position.

Resetting the System

You can reset the system by opening and
closing the sliding door.