Ford Transit Owner's Manual page 184

vehicle. To restore the correct operation
of the system, you must have the repaired
road wheel and tire assembly refitted to
your vehicle. For additional information,
see Changing Tires with a Tire Pressure
Monitoring System in this section.
Warning lamp
Solid warning lamp
Flashing warning
lamp
Transit (TTG) Vehicles Built From: 06-01-2014, Vehicles Built Up To: 31-12-2014, CG3612en enGBR, Edition date: 12/2013
Wheels and Tires
Description
Tire(s) under-inflated
Spare tire in use
Tire pressure monitoring
system malfunction
Spare tire in use
Tire pressure monitoring
system malfunction
When You Believe the System is Not
Operating Correctly
The main function of the system is to warn
you when the tire pressures are low. It can
also warn you in the event the system is
no longer capable of operating correctly.
See the following chart for information
concerning the system:
1. Make sure tires are at the correct
pressure. See Wheels and Tires
(page 176). The tire pressures are also
on the tire inflation pressure label
(located on the edge of driver door
or the B-Pillar).
2. After inflating the tires to the correct
pressure you must carry out the tire
pressure monitoring system reset
procedure. See Tire Pressure
Monitoring System Reset
Procedure in this chapter.
Repair the damaged road wheel and tire
and refit the repaired road wheel and tire
assembly to your vehicle to restore the
correct operation of the system.
If the tires are correctly inflated and the
spare tire is not in use but the light
remains on, the system has detected a
fault that requires service.
Repair the damaged road wheel and tire
and refit the repaired road wheel and tire
assembly to your vehicle to restore the
correct operation of the system.
If the tires are correctly inflated and the
spare tire is not in use but the light
remains on, the system has detected a
fault that requires service.
182
Action