Ford Transit Owner's Manual page 215

Note: As no common agreement exists, cell
phone manufacturers are able to implement
a variety of profiles in their Bluetooth
devices. Because of this, an incompatibility
can occur between the phone and hands
free system, which in some cases may
significantly degrade the system
performance. To avoid this situation, only
recommended phones should be used. To
check if your cell phone is compatible, refer
to the cell phone user manual or visit the
regional Ford website.
Bluetooth Setup
Before you can use your cell phone with
your vehicle it must be paired to the audio
system.
Message
ADD DEVICE
SET PRIMARY
LOAD PHONEBK
Transit (TTG) Vehicles Built From: 06-01-2014, Vehicles Built Up To: 31-12-2014, CG3612en enGBR, Edition date: 12/2013
Audio System
The following procedure is required before
an initial Bluetooth phone connection can
be made.
Note: Up to five Bluetooth devices can be
paired to the system.
Note: If there is an ongoing call when the
phone in use is selected as the new active
phone, the call is transferred to the vehicle
audio system.
Note: Even if connected to the system, your
phone can still be used in the usual way.
Note: A call will be disconnected if the
audio unit is switched off. If the ignition is
switched off the phone call will remain in
progress.
Description and Action
1. Press the PHONE button and then keep pressing the
MENU button to scroll to the screen display term. Press
the OK button.
2. Press the OK button again and note the six digit number
displayed.
3. Search for Bluetooth devices using the cell phone. For
information on phone settings, refer to your cell phone
user manual.
4. Select FORD AUDIO from the list of Bluetooth devices
found by your phone.
5. Enter the six digit number into your cell phone when
prompted to pair the audio system and cell phone.
1. Once pairing has been successful the screen display term
will be shown on the audio display.
2. Press the OK button twice to confirm your cell phone as
the primary device for all future connections.
1. The screen display term will then be displayed on the
audio unit. Press the OK button twice to confirm that the
contents of your phonebook are downloaded to the
system.
2. The Bluetooth device name is displayed on the audio unit.
213