Internet Setup; Static (Assigned By Isp) - D-Link DIR-605L User Manual

Section 3 - Configuration
Select Static IP Address if all WAN IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway
address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four
octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.
IP Address:
Enter the IP address assigned by your ISP.
Subnet Mask:
Enter the Subnet Mask assigned by your ISP.
ISP Gateway:
Enter the Gateway assigned by your ISP.
MAC Address:
The default MAC Address is set to the WAN's physical interface
MAC address on the Broadband Router. It is not recommended
that you change the default MAC address unless required by
your ISP.
Clone MAC
The default MAC address is set to the WAN's physical interface
Address:
MAC address on the Broadband Router. You can use the Clone
MAC Address button to copy the MAC address of the Ethernet
Card installed by your ISP and replace the WAN MAC address
with the MAC address of the router. It is not recommended that
you change the default MAC address unless required by your ISP.
Primary DNS
Enter the Primary DNS server IP address assigned by your ISP.
Address:
This is optional.
Secondary DNS
Address:
Maximum Transmission Unit - you may need to change the
MTU:
MTU for optimal performance with your specific ISP. 1492 is
the default MTU.
D-Link DIR-605L User Manual

Internet Setup

Static (assigned by ISP)

DIR-605L
13