L2Tp - D-Link DIR-605L User Manual

Section 3 - Configuration
Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username and
password. This option is typically used for DSL services.

L2TP:

Select Dynamic (most common) or Static. Select Static if your
ISP assigned you the IP address, subnet mask, gateway, and
DNS server addresses.
IP Address:
Enter the IP address (Static L2TP only).
Subnet Mask:
Enter the Primary and Secondary DNS Server Addresses (Static
L2TP only).
Gateway:
Enter the Gateway IP Address provided by your ISP.
DNS:
The DNS server information will be supplied by your ISP (Inter-
net Service Provider.)
Server IP:
Enter the Server IP provided by your ISP (optional).
L2TP Account: Enter your L2TP account name.
L2TP Password: Enter your L2TP password and then retype the password in the
next box.
Maximum Idle Enter a maximum idle time during which the Internet connection
Time: is maintained during inactivity. To disable this feature, enable
Auto-reconnect.
MTU: Maximum Transmission Unit - You may need to change the MTU
for optimal performance with your specific ISP.
Connect Mode: Select either Always-on, Manual, or Connect-on demand.
D-Link DIR-605L User Manual
Internet Setup
L2TP
DIR-605L
17