Dhcp Server Settings - D-Link DIR-605L User Manual

Section 3 - Configuration
DHCP stands for Dynamic Host Control Protocol. The
DIR-605L has a built-in DHCP server. The DHCP Server
will automatically assign an IP address to the computers
on the LAN/private network. Be sure to set your
computers to be DHCP clients by setting their TCP/IP
settings to "Obtain an IP Address Automatically. " When
you turn your computers on, they will automatically load
the proper TCP/IP settings provided by the DIR-605L.
The DHCP Server will automatically allocate an unused
IP address from the IP address pool to the requesting
computer. You must specify the starting and ending
address of the IP address pool.
Enable DHCP
Check the box to enable the DHCP server on your
Server:
router. Uncheck to disable this function.
DHCP IP
Enter the starting and ending IP addresses for the
Address Range:
DHCP server's IP assignment.
DHCP Lease
The length of time for the IP address lease. Enter
Time:
the Lease time in minutes.
D-Link DIR-605L User Manual

DHCP Server Settings

24