Internet Setup - D-Link DSL-2877AL User Manual

D-Link DSL-2877AL Modem Router User Manual
To access the Internet Setup page, click on the Setup menu link at the top, and then click on the Internet Setup menu link on the left.
You can manually configure the connection from this page. Please make sure you
have your ISP's connection settings first if you manually configure the connection.
Click Add to add a PVC
DSL Mode Configuration
DSL Mode：ATM
ATM PVC Configuration
VPI: Enter the correct Virtual Path Identifier (VPI) value for your ISP here.
VCI: Enter the correct Virtual Channel Identifier (VCI) value for your ISP here.
Service Category: Select the service category; it includes UBR without PCR, UBR
with PCR, CBR, Non Realtime VBR, Realtime VBR.
Connection Type
Protocol: PPPoE,PPPoA,MEA,IPoA,Bridge.
Encapsulation Mode: Select the appropriate Encapsulation Mode to use here.
Options to choose from are VC-Mux and LLC.
Service Category: Select the service category; it includes UBR without PCR, UBR
with PCR, CBR, Non Realtime VBR, Realtime VBR.
802.1Q VLAN ID: Enter the VLAN ID if required by your ISP.
IP Protocol: Select the IP version to configure. It includes IPv4, IPv6 and Both.(it is
not necessary to choose when Protocol is selected to be Bridge)

Internet Setup

Page 24