D-Link DIR-605L User Manual page 26

Section 3 - Configuration
1. To enable WPA, WPA2, or WPA/WPA2, select either
Enable WPA Only Wireless Security (enhanced),
Enable WPA2 Only Wireless Security (enhanced), or
Enable WPA/WPA2 Wireless Security (enhanced).
2. Next to Cipher Type, select TKIP, AES, or Both.
3. Next to PSK/EAP, select PSK.
4. Next to Network Key, enter a passphrase. The key
is an alpha-numeric password between 8 and 63
characters long. The password can include symbols
(!?*&_) and spaces. Make sure you enter this key
exactly the same on all other wireless clients.
5. Click Save Settings to save your settings. If you are
configuring the router with a wireless adapter, you
will lose connectivity until you enable WPA, WPA2,
or WPA/WPA2 (whichever of the three options you
have selected above) on your adapter and enter
the same network key as you did on the router.
D-Link DIR-605L User Manual 22