Firewall & Dmz - D-Link DIR-605L User Manual

Section 3 - Configuration
This section will allow you to set up a DMZ host and to set up firewall rules.
If you have a client PC that cannot run Internet applications properly from behind the DIR-605L, then you can set the client up
for unrestricted Internet access. It allows a computer to be exposed to the Internet. This feature is useful for gaming purposes.
Enter the IP address of the internal computer that will be the DMZ host. Adding a client to the DMZ (Demilitarized Zone) may
expose your local network to a variety of security risks, so only use this option as a last resort.
Enable SPI: Check this to enable SPI.
Enable DMZ Host: Check this box to enable DMZ.
DMZ IP Address:
Name: Enter the IP address of the computer you would like
to open all ports to.
Action: Choose a name for the firewall rule.
Source/Dest: Select to Allow or Deny transport of the data packets
according to the criteria defined in the rule.
Schedule: The Source/Destination is the TCP/UDP port on either
the LAN or WAN side.
IP Address: Click Add New to access the Schedules window. See
Maintenance>Schedules for more information.
Protocol: Enter a beginning and ending IP address.
Port Range: Select the transport protocol that will be used for the
filter rule.
Enter the desired port range for the filter rule.
D-Link DIR-605L User Manual
Firewall & DMZ
DIR-605L
32