Access Control - D-Link DIR-605L User Manual

Section 3 - Configuration
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from
accessing the Network. You can either manually add a MAC address or select the MAC address from the list of clients that are
currently connected to the Broadband Router.
Configure MAC
Select Turn MAC Filtering OFF, Turn MAC Filtering ON
Filter:
and ALLOW computers listed to access the network,
or Turn MAC Filtering ON and DENY computers listed
to access the network.
MAC Address:
Enter the MAC address you would like to filter.
To find the MAC address on a computer, please refer to
the Networking Basics section in this manual.
DHCP Client
Select a DHCP client from the drop-down menu and
List:
click the arrow to copy that MAC Address.
Schedule:
The schedule of time when the network filter will be
enabled. The schedule may be set to Always, which
will allow the particular service to always be enabled.
You can create your own times in the Maintenance >
Schedules section.
D-Link DIR-605L User Manual

Access Control

DIR-605L
29