Loading Documents; How To Load Documents; Using The Automatic Document Feeder (Adf) - Brother MFC-L8600CDW User Manual

3

Loading documents

How to load
documents
You can send a fax, make copies, and scan
from the ADF (Automatic Document Feeder)
and the scanner glass.
Using the automatic
document feeder (ADF)
The ADF can hold up to 35 pages
(MFC-L8600CDW) or 50 pages
(MFC-L8850CDW/MFC-L9550CDW) and
feeds each sheet individually. Use standard
2
20 lb (80 g/m ) paper and always fan the
pages before putting them in the ADF.
Document Sizes Supported
Length: 5.8 to 14 in. (147.3 to 355.6 mm)
Width: 5.8 to 8.5 in. (147.3 to 215.9 mm)
Weight:
17 to 24 lb (64 to 90 g/m

How to load documents

IMPORTANT
• DO NOT leave thick documents on the
scanner glass. If you do this, the ADF may
jam.
• DO NOT use paper that is curled,
wrinkled, folded, ripped, stapled, paper-
clipped, pasted or taped.
• DO NOT use cardboard, newspaper or
fabric.
• To avoid damaging your machine while
using the ADF, DO NOT pull on the
document while it is feeding.
NOTE
• To scan documents that are not
appropriate for the ADF, see Using the
3
scanner glass on page 40.
• It is easier to use the ADF if you are
loading a multiple page document.
• Make sure documents with correction fluid
or written with ink are completely dry.
a
3
3
2
)
b
c
3
Unfold the ADF document support (1).
Lift up and unfold the ADF document
output support flap (2).
Fan the pages well.
Stagger the pages of your document
face up top edge first, in the ADF until
the Touchscreen displays ADF Ready
and you feel the top page touch the feed
rollers.
3
3
1
2
39