Dialing And Storing Numbers; How To Dial; Manual Dialing; Dialing From The Address Book - Brother MFC-L8600CDW User Manual

8

Dialing and storing numbers

How to dial

You can dial in any of the following ways.

Manual dialing

a
Load your document.
b
Do one of the following:
 When Fax Preview is set to Off,
press (Fax).
When Fax Preview is set to On, press

(Fax) and Sending
Fax(es).
c
Press all digits of the fax number.
d
Press Fax Start.

Dialing from the Address Book

a
Load your document.
b
Press (Fax).
c
Press Address Book.
62
d
Do one of the following:
8
 Swipe up or down, or press a or b to
display the number you want.
 Press
letter of the name and press OK.
8
e
Press the number or the name you want.
f
To send a fax, press Apply.
g
Press Fax Start.
The machine scans and sends the fax.

LDAP search

If the machine is connected to your LDAP server,
you can search for information such as fax
numbers and E-mail addresses from your server.
(See Software and Network User's Guide)

Fax redial

If you are sending a fax automatically and the
line is busy, the machine will automatically
redial one time after five minutes.
The automatic redial only works when you set
Auto Redial to On. The default setting is On.
If you are sending a fax manually and the line is
busy, press Hook and then Redial, wait for the
other fax machine to answer, and then press
Fax Start to try again. If you want to make a
second call to the last number dialed, you can
save time by pressing Redial and Fax Start.
Redial only works if you dialed from the
8
machine.
, and then enter the first
8
8
8