Brother MFC-L8600CDW User Manual page 130

Chapter B
Error Message
Short paper
Size Error
Size Error
2-sided
Size mismatch
Small paper
Toner Error
1
Toner Low:X
1
(X) indicates the toner
cartridge color that is
near the end of its life.
BK=Black, C=Cyan,
M=Magenta, Y=Yellow
Too Many Files
Touchscreen
Initialization
Failed
Tray2 Error
118
Cause
The length of the paper in the
tray is too short for the machine
to deliver it to the face-down
output tray.
The paper size defined in the
printer driver is not supported
by the defined tray.
The paper size defined in the
printer driver and the
Touchscreen menu is not
available for automatic 2-sided
printing.
The paper in the tray is not the
correct size and is not available
for automatic 2-sided printing.
The paper in the tray is not the
correct size.
The paper size specified in the
printer driver is too small for the
machine to deliver it to the
face-down output tray.
One or more toner cartridges
are not installed correctly.
If the Touchscreen displays
Toner Low you can still print;
however, the machine is telling
you that the toner cartridge is
near the end of its life.
There are too many files stored
on the USB flash drive.
The Touchscreen was pressed
before the power on
initialization was completed.
Debris may be stuck between
the lower part of the
Touchscreen and its frame.
The optional lower tray is not
installed correctly.
Action
Open the back cover (face-up output tray) to let
the printed page exit onto the face up output
tray. Remove the printed pages and then press
Retry.
Choose a paper size which is supported by
each tray (see Paper type and size
on page 34.)
Press . Choose a paper size that is
-
supported by 2 sided printing.
The paper size you can use for automatic
-
2 sided printing is Letter, Legal or Folio.
Load the correct size of paper in the tray and
set the size of paper for the tray (see Paper
Size on page 31).
The paper size you can use for automatic
-
2 sided printing is Letter, Legal or Folio.
Do one of the following:
 Put the same size of paper in the paper tray
that is selected in the printer driver, and
then press Start.
 In the printer driver select the size of paper
that you loaded in the indicated paper tray.
Open the back cover (back output tray) to let
the printed paper out on the face-up output tray
and then press Retry.
Pull out the drum unit. Remove all of the toner
cartridges, and then put them back into the
drum unit.
Order a new toner cartridge for the color that is
indicated on the Touchscreen now so a
replacement toner cartridge will be available
when the Touchscreen displays Replace
Toner.
Reduce the number of files stored on the USB
flash drive.
Make sure nothing is touching or resting on the
Touchscreen.
Insert a piece of stiff paper between the lower
part of the Touchscreen and its frame and slide
it back and forth to push out the debris.
Reinstall the optional lower tray.