Brother MFC-L8600CDW User Manual page 129

Error Message
Replace Laser
Replace PF Kit MP
Replace PF Kit1
Replace PF Kit2
1
Replace Toner
1
The Touchscreen
indicates the toner
cartridge color that you
must replace.
BK=Black, C=Cyan,
M=Magenta, Y=Yellow
Replace WT Box
Scan Unable
Self-Diagnostic
Cause
It is time to replace the laser
unit.
It is time to replace the paper
feeding kit.
The toner cartridge is at the
end of its life. The machine will
stop all print operations.
While memory is available,
faxes will be stored in the
memory.
It is time to replace the waste
toner box.
Document is too long for
2-sided scanning.
The machine has a mechanical
problem.
The temperature of the fuser
unit does not rise to a specified
temperature within the
specified time.
The fuser unit is too hot.
Action
Contact Brother Customer Service or a Brother
Authorized Service Center to replace the laser
unit.
To replace the laser unit contact Brother
Customer Service at:
1-877-BROTHER (1-877-276-8437) (in USA)
http://www.brother.ca/support (in Canada)
or to locate a Brother Authorized Service
Center, visit:
http://www.brother-usa.com/service/
Contact Brother Customer Service or a Brother
Authorized Service Center to replace the paper
feeding kit.
To replace the paper feeding kit contact
Brother Customer Service at:
1-877-BROTHER (1-877-276-8437) (in USA)
http://www.brother.ca/support (in Canada)
or to locate a Brother Authorized Service
Center, visit:
http://www.brother-usa.com/service/
Replace the toner cartridge for the color
indicated on the Touchscreen (see Replacing
the toner cartridges on page 81).
Replace the waste toner box (see Replacing
the waste toner box on page 101).
Press . Use the appropriate size of paper
-
for 2 sided scanning (see Print media
on page 215).
 Press and hold down
machine off, and then turn it on again
(see Transferring your faxes or Fax Journal
report on page 120).
 If the problem continues, contact Brother
Customer Service.
Press and hold down
off, wait a few seconds, and then turn it on
again. Leave the machine idle for 15 minutes
with the power on.
Troubleshooting
to turn the
to turn the machine
117
B