When Received A Call - Kenwood DNX6140 Instruction Manual

_ : Displays short message status. If a cell-
phone which supports SMS function
is not connected, this mark does not
appear.
~
: There is unread short message.
_ : There is no unread short message.
111I: Downloading Phonebook.
1ll'!lIIlI: Indicates there is a calion hold.
ED: Displays the signal strength.*
The more the number of bar segments,
the stronger the signal.
I'm:
Displays the present Auto Answering
status
I'm:
When Auto Answering is on
~:
When Auto Answering is off
&iiII:
Displays the battery drain of the cell-
phone.*
The more the number of bar segments,
the higher the battery level.
[1] Displays the called phone numbers.
If you have registered a phone number in
the Phonebook, the destination person
name is displayed.
IlJ
Calls the displayed preset phone number.
W
Displays the SMS Select screen.
See <SMS (Short Message Service» (page
59).
[]] Displays the Search for Phonebook screen.
See <Calling by Phonebook> (page 51).
[]] Displays the Outgoing Calls screen.
See <Making a Call Using Outgoing/
Incoming Call Records> (page 53).
[I]
Displays the Incoming Calls screen.
See <Making a Call Using Outgoing/
Incoming Call Records> (page 53).
[]] Calls the preset phone number.
For information on how to preset a phone
number, see <Phone Number Preset> (page
58).
[[] Displays the Hands-Free Set Up screen.
See <Setting Up the Hands-Free Phone>
(page 55).
[Q]
Displays the Dialing Display screen.
See <Calling by Entering a Phone Number>
(page 50).
[TI]
Starts voice recognition.
See <Calling by Voice Recognition> (page
54).
~
Returns to the previous screen.
~
~
• While your car is moving. some functions are disabled for
safety's sake. The buttons associated with the disabled
functions become ineffective if pressed.
• When the Hands-Free Control screen appears, the name
of the connected cell-phone is displayed for 5 seconds.
• * Since the number of steps of the control unit is different
from that of the cell-phone. the statuses displayed on
the control unit may discord from those displayed on
the cell-phone. No status is displayed if information
about it cannot be obtained.
Setting the cell-phone in the private mode can disable
the hands-free function.
When Received a Call
When you receive a call, you can use the hands-
free phone.
D
Respond to a call
When a call arrives, the Talking screen appears
automatically.
IT] Starts conversation with a person called.
Switches the call destination if you hear a
tone of call-waiting.
Resumes conversation with the person on
hold after completed conversation with the
other party.
[1] Disconnects the phone.
IlJ
Switches the voice output between phone
and speaker.
W
Outputs dial tone.
See <Controlling Tone-based Services>
(page 51).
English.49