Registering Bluetooth Unit - Kenwood DNX6140 Instruction Manual

Setup Menu
Registering Bluetooth Unit
Registers the Bluetooth unit to be connected.
o
Display the Connect Device List screen
D
Search for a Bluetooth unit
OJ
Displays the registered Bluetooth unit.
Displays the busy service in red. Displays
the available service in gray.
[1]
Scrolls the name of the Bluetooth unit.
[l]
Searches for Bluetooth unit.
W
Registers Bluetooth unit that cannot be
registered by normal register (paring)
operation.
[]] Returns to the previous screen.
e
A new device cannot be registered if there are 5
registered Bluetooth units. Delete unnecessary
registration. See <Deleting Bluetooth Unit> (page 82).
D
Select the Bluetooth unit to register
I]]
Displays the searched Bluetooth unit.
IT]
Scrolls the name of the Bluetooth unit.
[]J
Cancels searching of Bluetooth unit.
[[] Starts search.
[lQ]
Scrolls.
ITIJ
Returns to the previous screen.
II
Enter PIN code
Enter the PIN code specified for the Bluetooth
unit to register.
__ _ __ _ _ _ __ . _ _ I 1 _ I
[g] Enters a code number.
[]] Cancels registration of PIN code.
[J]
Enters PIN code.
[ffi
Clears the code number.
~
~
You can also register from the Bluetooth unit side. For
the PIN code necessary for registration, see <Registering
Bluetooth Unit PIN Code> (page 81).
If the error message appears even though the PIN code
is correct, try <Registering Special Bluetooth Unit> (page
81)
80 1j ONX6140/0NX6000EX/ONXS140/00XS14/00XS034/00XS034BT