Sirius/Xm Control (North American Sales Area Only) - Kenwood DNX6140 Instruction Manual

Siriu's/XM Control (North American sales area only)
Various control screens appear in the Satellite radio source mode. (with the optional accessory Satellite
radio connected only. To connect the Sirius tuner, a conversion cable CA-SR20V (optional accessory) is
necessary and to connect the XM tuner, an XM interface Box KCA-XM100V (optional accessory) is necessary.)
Iff
• This document uses the SIRIUS display as an example.
Functions While Displaying the Control
Screen
Switches to control screen to use various
functions.
[SIRIUS] or [XM] button on the "Source Select"
screen
~
,-'
SEEK' seN -
TEL
OJ
Band display
[I]
Preset number
ITJ
Channel display
W
Displays information concerning music
being played.
Sirius: Changes the display from Channel
Name, Song Title Name, Artist Name,
Composer Name, to Category Name.
XM : Changes the display from Channel
Name, Title, Name, to Category Name.
Displays the ID number when Channel 0 is
selected.
Sirius: Displays the SIRIUS ID.
XM: Displays the RADIO ID.
[[] Tunes in a station.
[§]
Switches the band.
[1]
Switches the button display.
I]]
Starts or stops Channel Scan (that tunes
channels one after the other).
[ill
Switches the Seek mode.
SEEK 1: Tunes channels one after the other.
SEEK 2: Selects channels in memory one
after the other.
Iill
Switches the number of lines displayed in
the Information Display.
[J]
Indicates current Seek mode
[gJ
When" to . . buttons appear, you
can recall the channel on memory. For
memory of channel stations, see <Channel
Memory> (page 38).
[]] You can tune in by entering the desired
channel number. See <Direct Channel
Search> (page 39).
[H]
You can tune in by specifying the desired
category. See <Channel Search> (page 38).
~ Displays the program information screen.
See <Channel Search> (page 38) for channel
search.
English.37