Wisp Client Router Mode; Wisp Client Router Mode - D-Link DAP-1360L User Manual

Section 2 - Installation

WISP Client Router Mode

In the WISP Client Router mode, the DAP-1360L wirelessly connects to a WISP (Wireless Internet Service Provider) AP. In this
mode, the DAP-1360L also acts as a router for wired clients on your LAN and provides NAT (Network Address Translation) and
a DHCP server to generate IP addresses for wired clients only. NAT and the DHCP server allow many computers to share the
same wireless Internet connection.
If you are a WISP subscriber and want to access your WISP account using wired computers, connect your computers to the
DAP-1360L to get NAT, and then connect them to the WISP AP.
Computer
DAP-1360L
Internet
WISP Outdoor AP (In WISP Client Mode)
Connecting.Wired.PCs.to.the.Internet.Using.the.DAP-1360L
D-Link DAP-1360L User Manual 18