System Network; Networking - Thecus 8900 series User Manual

System Network

Use the System Network menu to make network configuration settings to an on
board network port or additional NIC as well as DHCP and link aggregation.

Networking

From the System Network menu, choose Networking, and the Networking
Configuration screen appears. This screen displays the network parameters of
the global setting and available network connection. You may change any of these
items and press Apply to confirm your settings. See a description of each item in
the following table:
The available system network ports are coming from embedded system ports and
additional system ports added through the reserved PCI-e slot with associated
compatible list. Therefore, the screen shown above is an example of a Thecus
N16000 with 3 on board GbE NIC and an additionally Intel PRO/1000 PT quad port
NIC, for a total of 7 NIC ports.
Network Configuration (Global parameter)
Item
Host name
Domain name
WINS Server
DNS Mode
DNS Server 1,2,3
Description
Host name that identifies the Thecus IP storage on the network.
Specifies the domain name of Thecus IP storage.
To set a server name for NetBIOS computer.
Select the DNS server is coming from DHCP server or manual input.
A total of 3 DNS servers can be input. If the DNS setting is chosen
from DHCP server, then it will refer to WAN/LAN1 port.
Domain Name Service (DNS) server IP address.
67