Cleaning Instructions - Pride Jazzy 1120 Owner's Manual

Hide thumbs Also See for Jazzy 1120:

Owner's manual (49 pages)

Owner's manual (40 pages)

Table Of Contents

Table of Contents

X .

C A R E

To calibrate the joystick (Remote Plus only):

1. Position the joystick in the full reverse position and hold it there. Turn on the controller.

2. The battery condition indicator display lights up from one bar to ten bars, and then back to one bar. It does this

twice, then blinks rapidly.

3. Turn off the controller.

4. Position the joystick in the full forward position and hold it there; then turn the controller on.

5. The battery condition indicator lights up from one bar to ten bars, and then back to one bar. It does this twice,

then blinks once, and then it blinks continuously.

6. Turn off the controller. Now the joystick and controller are set up to function properly together.

MONTHLY CHECKS

n Check that the anti-tip wheels do not rub the ground when you are operating the Jazzy. Adjust them as

necessary. See VI. “Comfort Adjustments.”

n Check for extreme wear on the anti-tip wheels. Replace them as necessary.

n Check for drive tire wear. See an authorized Pride provider for repair.

n Check the rear casters for wear. Replace them as necessary.

n Check the rear forks for damage or fluttering which indicates that they may need to be adjusted or have the

bearings replaced. See an authorized Pride provider for repair.

n Keep your Jazzy clean and free of foreign material, such as mud, dirt, hair, food, drink, etc.

YEARLY CHECKS

Take your Jazzy to an authorized service provider for yearly maintenance. This helps ensure that your Jazzy is

functioning properly and helps prevent future complications.

STORAGE

Your wheelchair should be stored in a dry place, free from temperature extremes. When storing, disconnect the

batteries from the Jazzy. See IX. “Batteries and Charging.”

WARNING! If you fail to store the unit properly, the frame can rust and the electronics can be

damaged.