Pride Jazzy 1120 Owner's Manual page 26

V I . C O M F O R T
FOOTREST HEIGHT
The footrest height is easily adjusted to one of six different heights in
1-in. increments.
To raise or lower the footrest:
1. Remove the 3/8-in. bolt and nut from the footrest. See figure
22.
2. Raise or lower the footrest to the desired height.
3. Install the 3/8-in. bolt and nut into the footrest and tighten.
FOOTREST ANGLE
You can adjust the angle of the footrest with a 3/16-in. hex key.
See figure 23.
To adjust the footrest angle:
1. Turn the setscrew clockwise to raise the front of the footrest.
2. Turn the setscrew counterclockwise to lower the front of the
footrest.
SWING-AWAY FOOTRESTS OPTION
Swing-away footrests (SFRs) are an option. They enable you to
swing the footrest to the side before transferring from your Jazzy.
To swing the footrests:
1. Push in the release lever. See figure 24.
2. Swing the footrest off to the side.
ELEVATING LEG RESTS OPTION
Elevating Leg Rests (ELRs) offer an infinite range of adjustment
between 0 and 70 degrees for the leg angle and a footrest adjust-
ment range of 15 – 20 in.
To adjust the ELR angle:
1. Press the release lever. See figure 25.
2. Move the leg rest to the desired angle.
To adjust the ELR height:
1. Remove the two screws from the side of each leg rest exten-
sion. See figure 26.
2. Loosen the bolt on the side of each leg rest extension.
26 www.pridemobility.com
A D J U S T M E N T S
REMOVE THIS NUT AND BOLT TO
RAISE OR LOWER THE FOOTREST
Figure 22. Footrest Height
Figure 23. Footrest Angle
Figure 24. Swing-Away Footrests
TURN SETSCREW
TO CHANGE
FOOTREST ANGLE
SFR RELEASE LEVER
Jazzy 1120/RevE/Feb03