SCENICVIEW XP70
Selecting a function or submenu
►
Press the "Select" key.
The submenu opens, or you can make the desired settings.
Setting a function
►
Press the
or
buttons on the remote control until the setting is correct.
If the function can only be activated or deactivated:
►
Select the desired function and activate it by pressing the "Select" button.
Saving setting and terminating OSD menu
►
Press the "Menu" button on the projector.
If you do not make a selection for about 40 seconds, the OSD menu closes, and the set
i
value is stored.
Returning to the higher-level menu
►
If you want to return to the higher-level menu, select the
with the "Select" button.
Basic menu
When you press the "Menu" button on the projector or the remote control, the basic menu appears.
16 - English
With the basic menu, you can set contrast, brightness, colour and
keystoning or switch to the setup menu.
symbol and confirm your selection
A26361-K954-Z100-1-5E19, edition 5