Connecting The Power Source; Basic Operation; Turning Off; Press The Power Button - Fujitsu LPF-4800 User Manual

Connecting the Power Source

1
Plug the power cable (supplied)
into the power terminal on the
back of the projector.

Basic Operation

POWER button
POWER
Adjustment button
ZOOM-PAN
Turning the Projector On and Off
Turning On
¡ Press the POWER button.
The POWER-ON monitor lights green and the
lamp comes on.
POWER-ON monitor display on projector front
Green : In operation
Red : Standby status
Orange : Lamp cooling
Important
• Always remove the lens cap before turning the
lamp on, otherwise the lens cap may become
deformed.
• The power cannot be turned off by pressing the
POWER button again for 1 minute after the
lamp comes on.
• Turn the projector on before turning the PC on,
otherwise the image display may be adversely
affected.
En-18
AUTO button
AUTO MUTE
MODE button
MODE
ENTER button
ENTER
MENU
STATUS
VOLUME KEYSTONE
CANCEL
2
Insert the power plug into the
power socket.
The POWER-ON monitor lights red and the
projector is in standby status.
STAND-BY
POWER-ON
POWER-ON monitor
POWER
POWER button
AUTO button
LCD

Turning Off

¡ Press the POWER button.
The confirmation screen is displayed.
When the button on the remote control unit is
pressed:
POWER BUTTON WAS PUSHED!
Push POWER button or
Move the cursor to "Power Off"
and push ENTER button
to turn projector off.
Power Off
When the button on the unit is pressed:
POWER BUTTON WAS PUSHED!
Push POWER button again to turn
projector off.
To cancel, push AUTO button or
MODE button.
TEMP. LAMP
AUTO MODE
MODE button
PROJECTOR
Cancel