SCENICVIEW XP70
Service menu
Factory reset
All settings are reset to the factory settings.
Info
Displays service information like the software version, operating hours, settings, etc.
Reset lamptimer
►
After replacing the lamp, set the lamp timer back to 0. Follow the instructions on the
OSD menu.
Service code
This function contains additional information that is only available to service personnel.
Userlogo menu
Default
If the projector does not find a signal source it displays the Fujitsu Siemens Computers
logo.
Blue
If the projector does not find a signal source it displays a blue screen.
22 - English
With the Service menu you can look up certain information about
the projector and can reset it to the factory settings.
In the user logo menu, you can select what the projector should
display if it cannot find a signal source.
A26361-K954-Z100-1-5E19, edition 5