Connecting The Projector To The Mains Voltage - Fujitsu SCENICVIEW XP70 User Manual

Connecting the USB cable
The projector has a computer interface with integrated USB functions. If your computer has a USB
port and a driver for a USB mouse is loaded, you can control the computer with the projector's
remote control as with a mouse. Proceed as follows:
► Insert the USB connector of the data cable (3) into the USB port on the computer (consult your
computer's manual).
Connecting projector to video sources
You can connect a camcorder or similar video device with the included accessory cable to the
"Video" and "Audio in" sockets. With the SCART cable, you can connect other video sources, for
example a video recorder.
You can connect corresponding video signal sources to the "S-Video" connection. The necessary S-
Video cable is not included.
You can connect a stereo output signal from your computer or from your audio/video source to the
"Audio in" port with the cables provided in the accessories pack. Playback then takes place via the
integrated loudspeaker. The volume can be adjusted with the "Volume" buttons in the control panel
of the projector or in the control panel of the remote control.
Check the respective device manuals for additional information.

Connecting the projector to the mains voltage

1
1 = Power connector
► Firmly insert the socket with the power cable supplied into the power connector (1) on the side
of the projector and check whether the socket is securely connected.
► Connect the plug on the power cable supplied into a properly grounded mains outlet.
► If necessary, plug the power connector of the connected device into a properly grounded mains
outlet.
A26361-K954-Z100-1-5E19, edition 5
SCENICVIEW XP70
English - 9