Error Displays - Clarion DXZ815MP Owner's Manual

If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
A disc is caught inside the CD deck and is
not ejected.
A disc loaded in the CD deck cannot be
played due to scratches, etc.
A disc is loaded upside-down inside the
CD deck and does not play.
Displayed when a non-recorded disc is
loaded in the CD deck.
A CD inside the CD changer is not loaded.
A CD inside the CD changer cannot be
played due to scratches, etc.
A CD inside the CD changer cannot be
played because it is loaded upside-down.
Displayed when the temperature in the
MD changer is too high and playback has
been stopped automatically.
An MD inside the MD changer is not
loaded.
An MD inside the MD changer cannot be
played due to scratches, etc.
An MD inside the MD changer cannot be
played because it is loaded upside-down.
Displayed when a non-recorded MD is
loaded in the MD changer.
This is a failure of the CD deck mechanism
and consult your store of purchase.
Replace with a non-scratched, non-warped-
disc.
Eject the disc then reload it properly.
Replace with a pre-recorded disc.
This is a failure of CD changer's mecha-
nism and consult your store of purchase.
Replace with a non-scratched, non-warped
disc.
Eject the disc then reload it properly.
Lower the surrounding temperature and
wait for a while to cool off MD changer.
This is a failure of MD changer's mecha-
nism and consult your store of purchase.
Replace with a non-scratched, non-warped
disc.
Eject the disc then reload it properly.
Load a pre-recorded MD in the MD
changer.
If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult your store of purchase.
36
DXZ815MP