Clarion DXZ815MP Owner's Manual page 31

Manual memory
The main unit has a manual memory function
for DAB programmes. Up to 18 programs (6
programs each) can be preset in the preset
buttons.
[M1], [M2] and [M3]
1. Press FNC button
W
to select DAB mode.
2. Press BND button [IQ) to select anyone shown
above.
3. Press the right or left SEARCH button
B]J
to
select a desired program.
4. Press and hold one of Preset buttons (1 to 6)
[ID
for 2 seconds or longer to store the program.
Note:
• The interrupt programme (PTY or INFO) cannot
be written into a manual memory.
Recalling a preset program
1. Press FNC button
l]]
to select DAB mode.
2. Press BND button
[IQ).
Each time you press
BND button
[IQ),
the display changes in the
following order:
[M1] .. [M2] .. [M3] .. [M1 ]...
3. Press one of Preset buttons
[!]
to recall a
preset programme.
Note:
• Press and hold Preset button
m
for 2 seconds or
longer to store the program currently being re-
ceived. (Manual memory)
AFfunction
The AF function switches to a different frequency
on the same network in order to maintain
optimum reception.
*
The factory default setting is "ON"
*
If the reception of the current broadcast station
deteriorates, "SEARCHING FOR SAME
STATION" or "SEARCH" appears in the display
and the radio searches for the same program on
another frequency.
• Switching OFF the AF function
Press AF button [[]. "AF" in the display goes off
and the AF function turns off.
• Switching ON the AF function
Press AF button [[]. "AF" in the display lights and
the AF function turns on.
*
If the reception of the current broadcast station
deteriorates, "SEARCH" appears in the display and
the radio searches for the same program on
another frequency.
Digital Radio / DAB Operations
TA (Traffic Announcement)
In TA standby mode, when a traffic announce-
ment broadcast starts, the traffic announcement
broadcast is received as top priority regardless
of the function mode. Traffic programme (TP)
automatic tuning is also possible.
*
This function can only be used when "TP" is lit in
the display. When "TP" is lit, this means that the
DAB broadcast station being received has traffic
announcement programs.
• Setting TA standby mode
If you press TA button []] when only "TP" is lit in the
display, ''TP'' and "TA" light in the display and the
unit is set into TA standby mode until a traffic an-
nouncement is broadcast. When a traffic announce-
ment broadcast starts, ''IRA INFO" appears in the
display. If you press TA button []] while a traffic
announcement broadcast is being received, the
traffic announcement broadcast reception is can-
celled and the unit goes into TA standby mode.
• Cancelling TA standby mode
With "TP" and "TA" lit in the display, press TA
button []]. The "TA" in the display goes off and
TA standby mode is cancelled.
*
If "TP" is not lit, pressing TA button [[] searches
for a TP station.
• Searching for a TP station
When "TP" is not lit, if you press TA button []],
"TA" in the display lights and the unit automati-
cally receives a TP station.
Note:
• If a TP station is not received, the unit continues the
search operation. Pressing TA button
ill
again goes
off 'TA" in the display and stops TP station searching.
INFO (Announcement)
In INFO standby mode, when the selected
announcement program starts, the main unit
switches to the selected announcement program
automatically.
• Setting INFO standby mode
If you press and hold TA button []] for 1 second
or longer, "INFO" lights in the display and the
main unit is set into INFO standby mode until the
selected announcement is broadcast. When the
selected announcement broadcast starts, the
announcement item appears in the display. If you
press and hold TA button
00
for 1 second or
longer while the selected announcement broad-
cast is being received, the selected announce-
DXZ815MP
31