Operations; Basic Operations - Clarion DXZ815MP Owner's Manual

Clock (CT) display
Main display...
Main display
*
Once selected, the preferred display becomes
the display default. When a function adjustment
such as volume is made, the screen will mo-
mentarily switch to that function's display, then
revert back to the preferred display several
seconds after the adjustment.
*
When you have entered a title in a CO/MO, it
appears in the sub display. If you have not en-
tered a title,
"1m
NO-TITLE" or
"rn
NO-TITLE"
appears in the title display instead. For infor-
mation on how to enter a title, refer to the sub-
section "Entering titles" in section "Other
Handy Functions".
Switching the display
Press DISP button
[TIJ
to select the desired dis-
play.
Each time you press DISP button
[TIJ,
the display
switches in the following order:
Adjusting the volume
Turning the Rotary knob
[lID
clockwise increases
the volume; turning it counterclockwise de-
creases the volume.
*
The volume level is from 0 (minimum) to 33 (maxi-
mum).
Note: Be sure to read this chapter referring to the front diagrams of
chapter "3. CONTROLS" on page 5 (unfold).
Basic Operations
Turning on/off the power
Note:
• Be careful about using this unit for a long time with-
out running the engine. If you drain the car's bat-
tery too far, you may not be able to start the en-
gine and this can reduce the service life of the
battery.
1. Press PWR button
rn.
2. The illumination and display on the unit light
up. The unit automatically remembers its last
operation mode and will automatically switch
to display that mode.
3. Press and hold PWR button
rn
for 1 second
or longer to turn off the power for the unit.
Note:
• System check
The first time this unit is turned on after the wire
connections are completed, it must be checked
what equipment is connected. When the power is
turned on, "SYSTEM CHCK"
a
"Push Power"
appears in the display, so press PWR button
fIJ.
The system check starts within the unit. When the
system check is complete, the power is turned off,
so press PWR button
fIJ
again.
Be sure to lower the volume before switch-
ing off the unit power or the ignition key. The
unit remembers its last volume setting. If you
switch the power off with the volume up, when
you switch the power back on, the sudden
loud volume may hurt your hearing and dam-
age the unit.
Selecting a mode
1. Press FNC button
rn
to change the mode of
operation.
2. Each time you press FNC button
rn,
the mode
of operation changes in the following order:
Radio mode
~
DAB mode
~
CD/MP3 mode
~
DVD DECK mode
~CD
changer mode
~
MD changer mode
~
TV mode
~
AUX mode
~
Radio mode...
*
External equipment not connected with CeNET
is not displayed.
10
DXZ815MP