Am/fm cd/mp3 player with cd/md changer/tv/dab/dsp control (45 pages)
Summary of Contents for Clarion DXZ858RMP
Page 1
Owner’s manual Mode d’emploi Bedienungsnleitung Istruzioni per l’uso Gebruiksaanwijzing Manual de instrucciones Bruksanvisning Manual de instalação DXZ858RMP CD/MP3/WMA Receiver / CeNET & Touch Panel Control • Récepteur CD/MP3/WMA/CeNET et écran de contrôle tactile • CD/MP3/WMA-Receiver /CeNET & Touch Panel Bedienfeld •...
Page 2
Thank you for purchasing this Clarion product. ∗ Please read this owner’s manual in its entirety before operating this unit. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual.
For your safety, do not watch or operate the touch panel while driving. 3. Driving on extremely bumpy roads may cause severe vibration and cause the sound to skip. INFORMATION FOR USERS: CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFACTURER WILL VOID THE WARRANTY. WARNING DXZ858RMP...
If you try to play such a compact disc, you may not be able to remove it from the CD player or it may damage the CD player. DXZ858RMP 2. Before the SLOPING CONSOLE closes, there may be a braking sound from the safety mechanism.
• Press the knob to turn the power ON. • Press the knob to turn the power OFF. • Turn the knob to adjust the volume. [CD SLOT] • CD insertion slot. DXZ858RMP DCP Detaching Slider • Removes the DCP. Display • Displays the various information that indicates the operating state of this unit such as tuning/ play state and indicators.
(cf. page 41). For the DVD changer, refer to the Owner’s Manual provided with the DVD changer. ● When the TV/DAB is connected ∗ For details, see the section “TV operations” (cf. page 44) or “Digital Radio/DAB operations” (cf. page 47). DXZ858RMP...
• Touch this button for preset channel up/down, folder up/down, and disc up/down operations. Sub buttons • Shows functions available in a certain context. DXZ858RMP ● Simple operation display (To switch to the simple operation display, press Right slide and hold the [MODE] button for 2 seconds or button longer.)
) or down ( ) with your fingertip still touching the display, and keep your fingertip on the display. The current operation continues for the time your fingertip is held on the display. This operation is used, for example, for fast-forwarding/fast-rewinding tracks. P.CH 2:45 DISP DXZ858RMP...
• This DCP is equipped with a highly advanced device. In order to make the best performance, it is required to get an electrical calibration by authorised service shop. Please consult with your Clarion dealer or distributor. DXZ858RMP Attaching the DCP 1.
• Dispose of used batteries properly. Receiver for remote control unit Operating range : 30° in all directions Signal transmitter [ TA ] [ BND ] [ a ], [ d ] [ DISP ] [ PTY ] [ AF ] Insertion guide DXZ858RMP...
PTY mode on and off. Press to cancel a PTY broadcast during a PTY interrupt. ∗ Some of the corresponding buttons on the main unit and remote control unit have different functions. DXZ858RMP CD changer CD/MP3/WMA DVD changer Returns to the first Moves the next disc track.
For descriptions for operations in the simple operation display, refer to the descriptions for the screen displays in the radio mode or the CD mode. P.CH 2:45 BAND PS/AS DISP in the radio or CD mode display DXZ858RMP...
Page 14
DISPLAY EDIT D-BLUE AUTO SCROLL SP/ANA COLOR ∗ The [COLOR] is displayed only when you choose wallpaper from P05 to P12. DXZ858RMP 3. Touch select [DAY] or [NIGHT]. P.CH 2:45 DISP 4. Touch select the color to set. ● COLOR •...
Page 15
• If CT data is not being received, “--:-- CT” appears in the display. Note: • CT data is not transmitted in some countries and 2:45 by some broadcast stations. Also, in some areas, DISP the CT data may not display accurately. SPE/ANA << TITLE Basic Operations DXZ858RMP...
AM: AM band name FM1: FM band name PRESET Touching this displays a preset memory No. list. DXZ858RMP BAND Touching this switches the reception band. Touching and holding this for 1 second or longer switches between the manual tuning mode and the seek tuning mode.
6 stations even after auto store is performed twice, stations stored so far remain in memory. • If auto store is performed in the FM bands, the stations are stored in FM3 even if FM1 or FM2 was chosen for storing stations. Radio Operations DXZ858RMP...
7 seconds or longer each. Stations with poor reception are skipped, and the next station is received. ■ To cancel preset scan 1. Touch [PS/AS]. “P-SCAN” display disappears and the stations that were being received when [PS/ AS] was touched are received next. DXZ858RMP...
"ON" or “OFF”. AF switching between DAB and RDS is enabled. OFF: AF switching between DAB and RDS is disabled. 5. Press the [ADJ] button to return to the original mode. DXZ858RMP...
Page 20
1. Touch [PRESET]. The preset memory No. list is displayed. 2. Touch the preset memory No. of the broadcast to be received. DXZ858RMP TA (Traffic Announcement) When a traffic announcement broadcast starts in the TA standby mode, the traffic announcement broadcast is received as top priority regardless of the function mode so you can listen to it.
PTY broadcast moving up the frequencies, while when is touched it seeks moving down the frequencies. ∗ If no station with the selected PTY broadcast can be received, this unit returns to the previous mode. DXZ858RMP...
Page 22
The PTY memory title list is displayed. 5. Touch and hold the preset No. to be stored for 2 seconds or longer. You will hear a long beep, and the selected PTY is stored to that preset channel memory. DXZ858RMP PTY item SVENSKA FRANÇAIS Nyheter Infos...
Page 23
[ROTARY] knob clockwise or counterclockwise to set the volume to the desired level (0 to 33). • When the TA, ALARM or PTY interrupt broadcast ends, the volume returns to the level that was active before the interrupt broadcast. RDS Operations DXZ858RMP...
Touching this pauses or resumes play. DISP The display contents can be changed. DXZ858RMP a/d (only in the simple operation display) Touching these buttons selects the track to play. Touching and holding these buttons fast- forwards or fast-rewinds tracks.
Page 25
Loading 8 cm compact discs ∗ No adapter is required to play an 8 cm CD. ∗ Insert the 8 cm CD into the center of the CD SLOT. DXZ858RMP Set to MP3/WMA Play MP3/WMA Play CD Play MP3/WMA...
1. Touch [ ■ To resume play 1. Touch [ ] again. DXZ858RMP Selecting a track When a CD-R/CD-RW recorded with an MP3 file or a WMA file is loaded, you can select only tracks recorded to the same folder by touching on the track display.
■ To cancel repeat play 1. Press the [MODE] button. Folder repeat play This function allows you to play the current folder repeatedly. 1. Press the [MODE] button. 2. Touch [FOLDER RPT]. ■ To cancel folder repeat play 1. Press the [MODE] button. DXZ858RMP...
1. Press the [MODE] button. Folder random play This function allows you to play all folders on the disc at random. 1. Press the [MODE] button. 2. Touch [FOLDER RDM]. ■ To cancel folder random play 1. Press the [MODE] button. DXZ858RMP...
OFF ➜ ON ➜ OFF... 3. Press the [SOUND] button to return to the original mode. on the right of the display to ADF MODE ADF 1 on the left of the display to switches the on the right of the display to DXZ858RMP...
Page 30
(Adjustment 1/1.25/1.5/2) 5. When the adjustment is complete, press the [SOUND] button to return to the original mode. DXZ858RMP Adjusting the treble (Gain, Frequency) This adjustment can only be performed when the ADF (Anti Distortion Filter) is set to "OFF".
1. Press the [SOUND] button. 2. Touch [FILTER]. 3. Touch on the right of the display to select the frequency value. • Select from THROUGH, 50Hz, 80Hz, or 120Hz. 4. Press the [SOUND] button to return to the original mode. Sound Adjustment DXZ858RMP...
The number of titles that can be entered is as follows: Mode Number of titles CD mode 50 titles TV mode 20 titles DXZ858RMP CD changer mode DCZ628 connected CDC655Tz connected CDC1255z connected TEXT 1. Either receive the TV station, or play a CD display for which you want to enter the title.
∗ This function is not compatible with all cellular telephones. Contact your local authorized Clarion dealer for information on proper instal- lation and compatibility. Common Operations Changing settings Selecting setting items 1.
• Setting the auto-volume function (cf. page 39) SYSTEM CHECK • Performing a system check (cf. page 39) CODEMATIC • Setting security (cf. page 40) SLIDE CONT • Setting the slide direction of the slide buttons (cf. page 40) DXZ858RMP Sub item...
Page 35
TEXT Common Operations on [FONT] to select the type of switches the type of on [TEXT] to determine the on the left of the display to ADJ APPEARANCE A U T O on the right of the display to DXZ858RMP...
Page 36
Adjust this setting item while viewing how the appearance of the display changes. 5. Press the [ADJ] button to return to the original mode. DXZ858RMP Making the LED blink when DCP is removed (BLINK LED) You can make the LED on this unit blink when the DCP is removed.
Page 37
5. Press the [ADJ] button to return to the original mode. Common Operations on the right of the display to ADJ SOUND WOOFER on the left of the display to ADJ SOUND CANCEL O F F on the right of the display to DXZ858RMP...
Page 38
• The factory default setting is “MID”. 1. Press the [ADJ] button to set to the adjust mode. 2. Touch [SETTING]. DXZ858RMP 3. Touch select "AUX SENS". AUX SENS 4. Touch set the input level.
Page 39
ADJ SETTING [ START ] on the left of the display to ADJ SETTING L O W on the right of the display. on the left of the display to ADJ SETTING [ START ] DXZ858RMP...
Page 40
5. Touch on the left of the display to select “CODEMATIC”. ADJ SETTING CODEMATIC DXZ858RMP Here, select the item for which “INPUT” is displayed at the right of the display. 6. Touch [INPUT]. The Touch Code display appears. 7. Enter the touch code.
(CD changer) ➜ (DVD changer) ➜ (TV) ➜ AUX ➜ Radio... ∗ The mode of equipment that is not connected is not displayed. DISC Play starts automatically when the mode 2:45 changes to the changer mode. DISP allows you to select selects discs. CAUTION DXZ858RMP...
The scan play function is useful when you want to select a desired track. 1. Press the [MODE] button. DXZ858RMP 2. Touch [TRACK-SCAN]. ∗ Scan play starts from the next track after the track currently being played. ■ To cancel scan play 1.
Page 43
The disc random play selects and plays individual tracks or discs automatically in no particular order. This function continues automatically until it is canceled. 1. Press the [MODE] button. 2. Touch [DISC RDM]. ■ To cancel disc random play 1. Press the [MODE] button. DXZ858RMP...
Title display The name of the station currently being received is displayed. VTR : In video mode Touching these switches the display. DXZ858RMP Reception band display TV1 : Band name Preset No. display Touching standard operation display selects a preset memory.
No. so that broadcasts can be checked. 1. Touch [PS/AS]. “P-SCAN” appears on the display. ∗ The currently stored stations are received in order for 7 seconds or longer each. Stations with poor reception are skipped, and the next station is received. DXZ858RMP...
• The factory default setting is “ON”. 1. Press the [ADJ] button to set to the adjust mode. 2. Touch [TUNER]. DXZ858RMP 3. Touch select [TV DIVER]. TV D I V E R 4. Touch select [ON] or [OFF].
You will hear a long beep, and the station is stored to memory. If you hear a short beep, the station is not stored to memory. Repeat the procedure from step 1. Note: • Interrupt programmes (PTY or INFO) cannot be written to manual memory. DXZ858RMP...
Page 48
● To set the TA standby mode ● To cancel the TA standby mode ● To search for a TP station DXZ858RMP Notes: • If a TP station is not received, the main unit stops the search operation.
Page 49
[ROTARY] knob clockwise or counterclockwise to set the volume to a desired level (0 to 33). • When the TA, INFO, ALARM or PTY interrupt broadcast ends, the volume returns to the level that was active before the interrupt broadcast. DXZ858RMP...
Noise is generated or noise is mixed with sound. DXZ858RMP Cause Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Consult your store of purchase. Turn the unit off and check each wire for a possible short.
Page 51
Measure Let dry for about 1 hour with the power on. Use ISO9660 level 1, 2 or JOLIET or Romeo file system. Use alphanumeric/ASCII characters for MP3/WMA file name. Use “.M3U” for the file extension of a play list. DXZ858RMP...
If an error display other than the ones described above appears, press the reset button. If the problem persists, turn off the power and consult your store of purchase. DXZ858RMP Cause This is a failure of CD deck’s mechanism and consult your store of purchase.