Clarion DXZ815MP Owner's Manual page 12

Basic Operations
2. Press the SEARCH button
[!lJ
and select from
"TREB
~GAIN ~"
.. "TREB
~F 12K~"
..
"TREB
~GAIN ~".
3. Turn the Rotary knob
[lID
clockwise or coun-
terclockwise as needed and adjust the gain
and the F (center frequency).
TRES GAIN:
-6
to
6
(The factory default
setting is "0")
TRES F : 8KHz/12KHz (The Factory
default setting is "12K")
4. When the adjustment is complete, press A-M
button
[Ig)
several times until the function mode
is reached.
Adjusting the balance
1. Press A-M button
[Ig)
and select "BALANCE".
2. Turning the Rotary knob
[IID
clockwise empha-
sizes the sound from the right speaker; turn-
ing it counterclockwise emphasizes the sound
from the left speaker.
*
The factory default setting is "0". (Adjustment
range: L 13 to R13)
3. When the adjustment is complete, press A-M
button
[Ig)
several times until the function mode
is reached.
Adjusting the fader
1. Press A-M button
[Ig)
and select "FADER".
2. Turning the Rotary knob
[IID
clockwise empha-
sizes the sound from the front speakers; turn-
ing it counterclockwise emphasizes the sound
from the rear speakers.
*
The factory default setting is "0". (Adjustment
range: F12 to R12)
3. When the adjustment is complete, press A-M
button
[lg]
several times until the function mode
is reached.
Adjusting the Beat EQ
1. Press BEQ button
[I]
and select the Beat EQ
mode (1 to 3) to adjust.
2. Press A-M button
[lg]
and select "BASS
BOOST
or
IMPACT
or
EXCITE".
3. Turning the Rotary knob
[IID
clockwise adjusts
in the + direction; turning it counterclockwise
adjusts in the - direction.
*
When BASS BOOST is selected, you can ad-
just the bass in the range of -3 to 3.
*
When IMPACT and EXCITE is selected, you can
adjust the bass and treble in the range of -3 to 3.
12
DXZ815MP
4. When the adjustment is complete, press A-M
button
[Ig)
several times until the function mode
is reached.
Turning on/off the loudness
The loudness effect emphasizes the bass and
treble to create a natural sound tone. When you
are listening to music at a low volume, it is rec-
ommended to use the loudness effect.
1. Press and hold LOUD button [g] for 1 second
or longer to turn on the loudness effect. When
the loudness effect is turned on, "LO" lights in
the display.
2. Press and hold LOUD button [g] for 1 second
or longer to turn off the loudness effect. "LO"
goes off in the display.
Note:
• When using
a
sold separately digital sound pro-
cessor (DPH91 0),
a
feature called auto loudness
is selected. This function is different from the loud-
ness effect. For further details on the auto loud-
ness feature, refer to the subsection "Output ad-
justment of auto loudness, subwoofer and
playback band" in section "DSP Operations".