Error Displays - Clarion Hino PJ-4605T Manual

6. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
Error Display Cause
CD MECHA This is a failure of CD deck's
ERROR mechanism.
DISC ERROR A CD cannot be played due to
scratches, etc.
A CD is loaded upside-down inside
the CD deck and does not play.
NO FILE
No MP3/WMA file is recorded in
the device.
USB ERROR Protocol or File system is not
correct.
NO DEVICE No connection or the connection is
loose.
NO FILE
No MP3/WMA file is stored in the
device.
HUB NOT
The HUB devices are not
SUPPORT
supported.
DEVICE NOT
The connected USB is not
SUPPORT
supported.
If an error display other than the ones described above appears, restart this unit. If the
problem persists, turn off the power and consult your store of purchase.
Measure
Eject the disc then reload it.
Replace with a non-scratched,
non-warped-disc.
Eject the disc then reload it
properly.
Record MP3/WMA files in the
device.
Replace with a USB device in
correct protocol or file system.
Reconnect the device.
Store MP3/WMA files in the
device.
Do not use the HUB devices.
Connect the other supported
device.
23