Switching Between Two Connected Cell-Phones - Kenwood KDC-X997 Manual

Switching between two connected cell-phones

When two Bluetooth devices are connected, you can assign the Bluetooth device to be used in priority to the
other Bluetooth device.
1. Press [Ú].
"BT MODE" appears and enter the Bluetooth mode.
2 Select "Device Priority" using [Control] knob.
3. Select a "Sub –###–" using [Control] knob.
"Main": Device used normally.
"Sub": Device used only for call reception.
4. Press [Control] knob.
Exiting from the Bluetooth mode
Press [Ú].