Delay Time Control - Kenwood KDC-X997 Manual

Delay time control

Preparation for setting
If you specify the distance from the center of the currently set listening position to every speaker, the
delay time will be automatically computed and set.
1. Determine the center of the currently set listening position as the reference point (• in the
illustration shown below).
2. Measure the distances from the reference point to the speakers.
3. Calculate the differences between the distance of the furthest speaker and other speakers.
4. Input the differences calculated in step 3 for individual speakers.
5. Adjust gain for individual speakers. A sound image will be shifted to the speaker with increased
gain.
1. Press [SRC] and select a source other than Standby ("STANDBY") using [Control] knob.
2. Press [Control] knob.
Enters the Function setting mode.
3. Select "Audio Control"
4. Select a speaker using [Control] knob.
Speaker
Front Left speaker
Front Right speaker
Rear Left speaker
Rear Right speaker
Subwoofer Left
Subwoofer Right
(Colored text: Factory setting)
5. Select a value using [Control] knob.
Exiting from the Function setting mode
Press and hold [1/6].
> "Pro Setup" > "DTA Settings" > "DTA" using [Control] knob.
Display Range
"FrontL" 0
"FrontR" 0
"RearL" 0
"RearR" 0
"SW L" 0
"SW R" 0
– 20.01 feet
– 20.01 feet
– 20.01 feet
– 20.01 feet
– 20.01 feet
– 20.01 feet