Bluetooth Device Registration Test - Kenwood KDC-X997 Manual

Bluetooth device registration test

You can check whether a Bluetooth device can be registered by operating this unit.
1. Press [Ú].
"BT MODE" appears and enter the Bluetooth mode.
2 Select "BT Test Mode" using [Control] knob.
3. Start registering a unit by operating the Bluetooth device.
"Please paring your phone" appears.
Operate the Bluetooth device to request this unit for connection.
The name of this unit ("KDC-####") is displayed on the Bluetooth device.
Some Bluetooth device requests you to enter a PIN code. The PIN code is set to "0000" as default.
4. Press [Control] knob.
When pairing is completed successfully, a connection test starts automatically.
When the connection test is completed, test results are displayed on a function basis ("OK": Enabled;
"NG": Disabled).
Display
"Pairing"
"HF Connect"
"AUD Connect"
"PB Download"
5. Press [Control] knob.
Exits the test mode.
Description
Registration in this unit
Hands-free phoning
Audio playback
Phone Book downloading