Table of Contents
Advertisement
Switching Display for Tuner
You can change the display used when listening to the radio.
—)
Station frequency
v
Clock
eee |
{Note |]
(Function of remote)
2 Press the DIRECT button
The frequency part of the display blinks for 10 seconds
It you make no input in the 10-second petiod, direct access
tuning is automatically canceled.
blinking
If you want to fisten to an FM station at 92.1 MHz, for
example, press 0, 9, 2, and 1.
If you want to listen to an AM station at 810 kHz, for example,
press 0, 8, 1, and 0
Nore |
When a frequency which cannot be received Is input, this
frequency is not verified and operation returns to the original
frequency input made
Canceling Direct Access Tuning:
Press the DIRECT-button again.
=a45 =
Advertisement
Table of Contents
