Channel Level Fine Adjustments - Kenwood KDC-X997 Manual

Channel level fine adjustments

After DTA compensation, you can finely adjust the unsatisfactory speaker volume of respective speaker.
1. Press [SRC] and select a source other than Standby ("STANDBY") using [Control] knob.
2. Press [Control] knob.
Enters the Function setting mode.
3 Select "Audio Control"
4. Select a speaker using [Control] knob.
Speaker
Front Left speaker
Front Right speaker
Rear Left speaker
Rear Right speaker
Subwoofer Left
Subwoofer Right
(Colored text: Factory setting)
5. Select a value using [Control] knob.
Exiting from the Function setting mode
Press and hold [1/6].
> "Pro Setup" > "DTA Settings" > "Channel Level" using [Control] knob.
Display
"Front" "L"
"Front" "R"
"Rear" "L"
"Rear" "R"
"SW" "L"
"SW" "R"
Range
-8 – 0 dB
-8 – 0 dB
-8 – 0 dB
-8 – 0 dB
-8 – 0 dB
-8 – 0 dB