Table of Contents
Advertisement
Software Update Utility
Installing the SUU
Rev 2.00
From time to time a new version of the HRDVS software may be available from Honeywell.
The HRDVS comes with two software applications that allow you to update software using
a PC with your HRDVS:
•
Software Update Utility (SUU) for updating firmware. The SUU is a Windows-based
application that writes the data to the HRDVS memory via an RS232 connection and
updates the flash in a one-load operation.The SUU requires little setup, but it can
only perform this one function. If you only need to update the HRDVS firmware, the
SUU is the simplest way to do it.
•
Remote Access Software (RAS) for updating software. RAS is a more versatile
application. To use it you must first set up a communication device on your
Windows operating system.
This chapter describes how to:
•
Install the SUU
•
Connect the HRDVS to your PC using a serial null modem RS-232 cable
•
Configure the HRDVS to use the SUU
•
Download software using the SUU
Note
The HRDVS does not record digital video while you are downloading
software.
Caution
Powering down during the flash update requires a service card to
restore the unit to operational state. It may also require a service
call.
The SUU runs on a PC with Windows 98/NT/W2K/XP operating systems. To install the
application:
1.
Insert the RAS CD-ROM in the CD-ROM drive of your PC.
2.
Use Windows Explorer to open the SUU folder.
3.
Locate the Setup.exe file and double-click it.
107
A
Document 900.0281
02/07
Advertisement
Table of Contents
