Table of Contents
Advertisement
Amount of recorded
timelapse data available
on the hard dirve
Search Screen
Rev 2.00
Figure 15-1
Go To Search Screen
Select Search to open the Search screen
Reports to open the Reports menu (see
Function
on page 90). Select Exit to cancel the search.
4.
The Go To screen indicates the amount of recorded data currently available on the
recorder hard drive. Use this information as a guideline when searching through
recorded data.
5.
Select a unit from one of the time, date or camera fields to change. Use the up and
down arrows ( ,
) to change the time, date or camera value.
6.
Wait as the background video on the Go To screen changes to reflect the change.
7.
Continue to change time, date and camera values until the video displayed is the clip
you are searching for.
8.
Select Go To and press Enter to start playing back the clip.
Use the Search screen to set the criteria used to generate a video clip list by searching all
of the previously recorded video clips.
1.
Press SEARCH ( ) on the HRDVS front panel.
2.
If passwords are enabled, enter a user ID and password when prompted.
3.
Press Enter. The Go To screen displays
4.
Select Search and press Enter.
(Search Screen
Searching for Video Clips Using the Report
(Figure
15-1).
Figure 15-2
displays.
85
HRDVS Reference Guide
on page 85). Select
Document 900.0281
02/07
Advertisement
Table of Contents
