Making Changes With Function Mode - Eclipse CD7200 mkII Reference Manual

Various Settings
Making changes with Function Mode
A variety of settings can be changed.
Switching the Function Mode
II
Press the ra-/MENU] button for
more than one second.
The Menu selection mode is activated.
2
Press the [SELECT] (Up/Down)
button to select FUNC, and then
press the [ENTER] button.
The function mode is activated.
II
Press the [SELECT] (Up/Down)
button to select a setting item.
When the button is pressed, the
setting item changes in the following
order.
STATION NAME*1 ~ DISC TITLE*2 ~
GUIDE TONE
~
Clock ONIOFF
~
Clock Adjust ~ Demo ~ HO RAOIO*3
~ AUX ONI OFF*4 ~ AUX Sens*4 ~ SI
A Sens ~ Steering SW ~ SIRIUS 10*5
~ XM 10*6 ~ Phone Setting*? ~ BT
Audio Set*8
*1: Cannot make settings other than
for tuner operation.
*2: Cannot make settings other than
for CD/CD changer operation.
*3: This setting can only be chosen
when an optional HD Radio tuner
unit is connected. (Refer to page
94 for details on HD Radio
operation. )
*4: Refer to page 109 for detail on
AUX operation.
84
*5: This setting can only be chosen
when an optional SIRIUS Satellite
radio tuner unit is connected.
(Refer to page 102 for details on
SIRIUS Satellite radio operation.)
*6: This setting can only be chosen
when an optional XM Satellite
radio tuner unit is connected.
(Refer to page 98 for details on XM
Satellite radio operation.)
*7: (For details, refer to "Setting the
Bluetooth hands-free function" on
page 52.)
*8: (For details, refer to "Bluetooth
audio setup" on page 38.)
Setting a station name/disc title
The name of the station being received, or the
title of the CD being played can be set.
~ATTENTION
Not available with HO-Radio or SAT radio.
1
Press the [SELECT] (Up/Down)
button to select Station Name or
Title.
Station Name or Title will be selected
based on the current audio mode
settings.
B
Press the [ENTER] button.
The title setting mode is activated.
II
Press the [SCREENITEXT] button
to select the character type.
Pressing the button will switch types
from [ABC] (upper-case alphabet
characters) to, [123] (numeric
characters) and then [!"#] (symbols).